Daniel Pregrasso of Process Solutions discusses Horner Automation Group’s products and services.

July 26, 2019
By Daniel Pregrasso

” PLC’s are well adapted to a range of automation tasks. These are typically industrial processes in manufacturing where the cost of developing and maintaining the automation system is high relative to the total cost of the automation, and where changes to the system would be expected during its operational life. PLC’s contain input and output devices compatible with industrial pilot devices and controls; little electrical design is required, and the design problem centers on expressing the desired sequence of operations. PLC applications are typically highly customized systems, so the cost of a packaged PLC is low compared to the cost of a specific custom-built controller design. On the other hand, in the case of mass-produced goods, customized control systems are economical. This is due to the lower cost of the components, which can be optimally chosen instead of a ‘generic’ solution, and where the non-recurring engineering charges are spread over thousands or millions of units.” ‐ Wikipedia.

Traditional PLC configurations struggle to meet automation requirements without adding external, sometimes third party hardware and software to complete an entire control system. Automation systems are no longer solely about simple ladder logic used to replace relays – modern automation systems are designed for speed of implementation, flexibility, scalability, and connectivity; all while providing detailed user facing information, in real time. To meet these requirements, engineers and integrators have become adept at coupling many different products from multiple manufacturers to appear seamless.

When multiple software and hardware solutions are combined from different manufacturers or even disparate products from the same manufacturer, the level of complexity increases. This complexity may cause an increase in development time, both at the project inception and with future project changes. Often times initial design considerations limit future expansion capabilities. Additionally, the ability to provide integrated I/O options, integrated communications, integrated motion control, graphical user interfaces, and flexible data collection comes at a very high price ‐ if it even exists within a traditional PLC solution.

Incorporating one of our All-in-One controllers, rather than a traditional PLC into an automation design, allows engineers and users the opportunity to take advantage of a completely integrated solution, manufactured by one company. Below are five keys our controllers provide to overcome these traditional PLC limitations.

  1. Software Traditional PLC based applications are programmed using proprietary software. Some projects may include: PLC programming software, HMI development software, SCADA software, and data collection systems, which make a project extremely complex and very costly. With an engineered solution consisting of multiple manufacturers’ products, there is a cost and learning curve for every element of the project.Our All-in-One controllers allow for programming and configuration of all aspects of the automation project within a singular environment. Through Cscape software, We allow programming in our enhanced ladder logic environment as well as in all of the IEC-61131 programming languages, a complete HMI graphical configuration suite, HTML5 web development, and a full featured motion configuration environment ‐ all for little or no cost.
  2. I/O Traditional PLC based applications include options for I/O to be mounted with the processor in a backplane or on a local bus. Some traditional solutions also have provisions to support remote I/O on one or more network bus options. Our All-in-One controllers provide local I/O options built directly into the controller/HMI. These options are included with the part number selection and for many applications, eliminate the need for purchasing additional costly add-on I/O. But for projects that need higher I/O counts, our All-in-One controllers also provide seamless connectivity to many different network bus options; many of which can be configured to run simultaneously. Our team at Horner provides a wide selection of proven I/O for almost any application.
  3. Communications While times have changed with regard to a traditional PLC’s ability provide network communications capabilities, the fact remains that most traditional PLC manufacturers provide most of their support around their network of choice. Whether it is Ethernet/IP, ProfiNet or even Modbus/TCP, manufacturers center their core support around one or two select methods of communications. With our All-in-One controller solutions, we have maintained the support of all the communication options since the beginning of our development. So rather than starting fresh with each new product release, we have continued development and support around the legacy direct driver connections as well as a core of CAN based protocols including among others, J1939. Horner has also developed around most of the popular industrial Ethernet protocols like: Ethernet/IP, Modbus/TCP and even BAC/Net.
  4. Connectivity Traditional PLCs provide limited connectivity options without incorporating additional modules or third party interfaces. Gateways, unique software, and custom hardware interfaces have become the standard when trying to connect traditional PLCs to field devices. In many of our All-in-One model options, a customer will have the ability to simultaneously use the following hardware connections: two independent Ethernet ports, three serial ports, two CAN Bus ports, and the widest range of on board I/O in the industry.
  5. Data Collection Actual data collection within the confines of a traditional PLC doesn’t exist. Solution providers have learned to “add-on” SCADA software and the associated PC hardware to run the SCADA. Even HMI offerings from most manufacturers do not include the ability to log real-time data. Even if logging data into registers within the core PLC memory were acceptable, retrieving that data for use within any type of analytical environment would prove to be less than productive. Our products at Horner have been designed with data collection in mind from day one. Introducing the very first micro-SD logging solution many years ago, we immediately began to understand the value of real-time data collection and retrieval. Through almost 25 years of perfecting our software, data logging continues to be one of the most renowned features within our Cscape environment. Directly through the OCS products and our upcoming WEBMI feature, customers have the ability to:
    • Visualize historical trends and historical data in many other formats
    • Capture information without the use of expensive add-on devices or software
    • Present this data in HTML5 format through the use of this powerful real-time data collection functionality, allowing customers to interact remotely via any internet enabled device




Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s